PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED WITHIN THIS DOCUMENT IS THE SOLE PROPERTY OF THE PORTABLE BAR COMPANY
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF THE PORTABLE BAR COMPANY IS PROHIBITED.
STEP 1:
Unscrew thumbscrew of center cutting board.
Ice bins installation
STEP 2:
Take the center cutting board out.
STEP 3:
Place ice bins.
Acrylic panels swapping
STEP 1:
Fold down the bar. Follow Steps 1-7 on Page 6.
STEP 2:
Remove all the screws located at the sides, and
uninstall the secuirty tab, as shown below.
STEP 3:
Pull out acrylic panel.
Figure 25
Figure 26
Figure 22
Figure 23
Figure 24
FOLD+ROLL BACK BAR ASSEMBLY SETUP STEPS
10