Porsche PIWIS Tester III, Service Training, Page: 71 / 103

CHAPTER1
PIWIS Tester III (PT3)
65
Equipment trolley (PIWIS Tester trolley) 10
The equipment trolley (VAS 6950), which was used previously for the PT2G, can still
be used. However, the top support plate on the equipment trolley must be replaced
so that the new PT3 docking station can be fitted. Users can order a new retrofit kit
developed for this purpose when the PT3 is launched. This contains two new plates,
which can be fitted on the existing equipment trolley. The height of the new plates
can be adjusted to various positions as required and the plates can then be fitted.
Example of fitting the plates contained in the retrofit kit 9_122_16
The equipment trolley (VAS 6556A) will be available at the same time as the market
launch of the PT3. This will replace the previous trolley. The new equipment trolley
has even more functions. It has additional storage options, a lockable sliding door
and a cable boom, for example.
9_124_16
9_123_16
Bottom plate
Top plate