Porsche PIWIS Tester III, Service Training, Page: 61 / 103

CHAPTER1
PIWIS Tester III (PT3)
55
9.2 Network configuration
PIWIS Tester III can go online via LAN (cable connection) or WLAN (wireless connection).
The ‚Network configuration‛ option must be called up for this. The necessary settings
are then made and saved. It is recommended to either get the data relating to the
configuration from the PC Support team/IT manager or better to have PC Support
configure the network connection directly. The required network cards for both LAN
and WLAN are already integrated in PT3 as hardware. LAN always has priority when
PT3 is connected to the network via LAN (cable).
Status display 9_105_16
9_106_16
The PT3 is intended for wireless operation
with WLAN. A WLAN access point that
supports WPA2 encryption must be available
for this. For security reasons, WPA2 is
the only encryption method used. Once
this condition is met, the interface with
the vehicle (VCI) can also be supported
wirelessly on the vehicle.
System

Network configuration
Status display
Network connection
Settings
Proxy Options
Help
Active network adapter
DNS name
IP address
Subnet mask
Default gateway
LAN connection status
PPN connection status
Proxy settings
Name
IP address
Port
Standard gateway/PPN ping
Update
System

Network configuration
Help
Status display Settings Proxy Options
Select connection:
Obtain IP address automatically (DHCP)
Use the following IP address
IP address
Subnet mask
Default gateway
WINS
Preferred WINS server
Alternate WINS server
Obtain DNS server address automatically
Use the following DNS server address
Preferred DNS server
Alternate DNS server
Update
Save