Driving and Driving Safety
197
Raising the vehicle with the jack
Whenever it is necessary to raise the vehicle using
the jack:
f
Manually set normal level and then switch off
the leveling system.
Switching off level control
1.
Switch on ignition.
2.
Press the rocker switch forward for
10–15 seconds.
A message appears on the multi-purpose
display of the instrument panel when the
rocker switch is released.
The vehicle can now be raised.
Switching the leveling system back on
1.
Switch on ignition.
2.
Press rocker switch forward for
10–15 seconds
or
drive off in the vehicle.
The leveling system switches on automatically.
Transporting the vehicle on car trains,
ferries and car transporters
f
Tie the vehicle down only at its wheels.
Porsche Active Suspension
Management (PASM)
Three different chassis setups can be selected at
the push of a button:
– comfort
– normal
– sport
If the chassis setups “comfort” or “normal” have
been selected, the system automatically changes
the setup to “sport” when the vehicle is driven in
a sporty manner.
Selecting chassis setup
1.
Switch on ignition.
2.
Press the appropriate button.
Information
The last selected chassis setup is stored in the
memory after the ignition is switched off.
Indication of the selected chassis setup
The light-emitting diode in the button of the
selected chassis setup lights up.
In addition, the selected chassis setup is shown on
the multi-purpose display of the instrument panel
for approx. 5 seconds.
Warning message
The system automatically detects PASM faults. In
this case, a warning message appears on the
multi-purpose display of the instrument panel.
f
Please see the chapter “OVERVIEW OF
WARNING MESSAGES” on page 139.
f
Adapt your driving style according to the
changed conditions.
f
To remedy the fault, consult an authorized
Porsche dealer.
