manualshive.com logo in svg

Porsche CAYENNE 2011, Owner'S Manual

Share
Download
Porsche CAYENNE 2011 Owner'S Manual Download Page 136

134

Instrument Panel and Multi-Purpose Display

Setting activation of the rear wiper when 

reverse gear is engaged

You can configure the rear wiper to automatically 

perform a series of wipes when it is raining when 

reverse gear is engaged.

Available setting options:

– “

Automatic

” 

The rear wiper performs a series of wipes 

when reverse gear is engaged.

– “

Manual

” 

The rear wiper is not activated when reverse 

gear is engaged.

Lowering door mirror on passenger's side 

when parking

You can configure the door mirror on the 

passenger’s side to tilt downwards automatically 

when reverse gear is engaged to provide a better 

view of the curb.

Locking settings

The locking and unlocking settings on the vehicle 

can be adjusted.

The Entry function can be switched on and off.

Setting door unlocking

You can configure specific doors to unlock when 

the vehicle is unlocked.

Available setting options:

– “

All doors

” 

All doors and the tailgate are unlocked when 

the vehicle is unlocked.

– “

Driver’s door

” 

The driver’s door and the tailgate are unlocked 

when the vehicle is unlocked.

1.

Main menu: Select “

Vehicle

” 

> “

Settings

” 

> “

Light & Visibility

” 

> “

Wiper

” 

2.

“

Rear wiper

” 

and confirm.

3.

Select desired setting

and confirm.

1.

Main menu: Select “

Vehicle

” 

> “

Settings

” 

> “

Light & Visibility

” 

> “

Revers. opt.

” 

and confirm.

2.

Select “

Lowering mirr.

”. 

3.

Confirm selection.

 Door mirror is lowered.
 Door mirror is not lowered.

1.

Main menu: Select “

Vehicle

” 

> “

Settings

” 

> “

Locking

” 

and confirm.

1.

Main menu: Select “

Vehicle

” 

> “

Settings

” 

> “

Locking

” 

2.

“

Door unlock

” 

and confirm.

3.

Select desired setting

and confirm.

Summary of Contents for CAYENNE 2011










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands