Ashtray light
1 - Remove the two screws in ashtray hous-
ing and pull the housing upward and out.
2 - Slide bulb holder out of the housing and
replace defective bulb.
3 - Slide bulb holder back into housing and
check light by turning on the ignition.
4 - Reinstall the ashtray housing.
Interior lights
The following description applies to the
dome lights and the lower door panel lights:
1 - Insert screwdriver in cut-out on head-
liner and carefully pry out the lamp hous-
ing.
2 - Remove defective bulb between contact
springs and insert new bulb.
3 - Insert one side of the lamp housing into
cut-out and press firmly on the other side.
Light unit will snap into place.
Manual Operation of
Retractable Headlights
If the retractable headlights do not work
automatically, they can be operated manu-
ally by turning the knob on the end of the
motor drive shaft (arrow). The connecting
rod assembly is designed in such a way that
it need only by turned to the left to either
raise or retract the headlights.
Warning: Do not turn the knob on the
drive shaft as long as the automatic me-
chanism is operating. The motor may
turn suddenly and cause injury. Before
turning the knob, check whether the
motor will work with the ignition in
position 1 or 2 and the light switch in po-
sition 2.
68
