Front turn signal lights (A)
Front parking lights (B)
1 - remove screws from plastic trim, take off
trim
2 - remove screws holding the lens, and
remove lens
3 - remove bulb from bulbholder, and fit new
bulb
4 - reinstall lens, tighten screws. Check
functioning of light
5 - install plastic trim and tighten retaining
screws.
Fog lights
1 - remove screws from plastic trim, take off
trim
2 - remove Philips screws. Take off lamp
3 - disconnect wire. Push down holding
clamp for bulb
4 - remove defective bulb and replace. Be
sure guide pins on bulb base fit into
socket of reflector
5 - reinstall lamp, tighten screws. Check
functioning and adjustment of light
6 - install plastic trim and tighten retaining
screws.
66
