Storage, Luggage Compartment and Roof Transport System
203
7.
Place the carriers on rotary holders
G
.
Risk of damage to the seals through unintentional
pinching between roof and supports.
f
Insert seals
F
in the supports.
8.
First, screw in all eight carrier fastening
screws using torque wrench
D
until flush with
the
surface. Then tighten all eight screws until
the arrow markings on the torque wrench are
exactly aligned.
9.
Fold the cover flaps
H
of the carriers fully
downwards and push the desired load-carrying
device (e.g. ski box, bicycle carrier) into the
carrier.
10.
Cut the cover trims
C
to size and push them
sideways into the carriers or press them into
the carriers from above to protect against
moisture and dirt as well as to prevent wind
noise.
11.
Fold up and lock the cover flaps.
Information
f
After driving 30 miles (50 km), retighten all
screws on the carriers and load-carrying
devices.
NOTICE
14_991_Turbo_21.book Seite 203 Mittwoch, 9. April 2014 2:19 14
Summary of Contents for 911 Turbo 2014
Page 1: ...911 Turbo Owner s Manual...
