Porsche 911 Turbo 2014, Owner'S Manual

Page: 122 / 300

120
Instrument Panel and Multi-Function Display
Adapting lower status area
You can assign the current time and outside
temperature to the lower status area B in the
multi-function display.
Available display contents:
– “ Time ”
– “ Temperature ”
– “ Time & Temp. ”
Adjusting display brightness
The brightness of the multi-function display can be
adjusted to suit individual requirements.
Light and visibility settings
The exterior lights, interior lighting and visual aids
for reversing the vehicle can be adapted
individually.
Adjusting exterior lights
You can adapt the exterior light functions on the
vehicle e.g. off delays of the Welcome Home and
Entry functions in the “
Exterior lights
” menu.
Activating and deactivating High Beam
Assistant
High Beam Assistant can be activated and
deactivated. The settings remain stored when the
ignition is switched on and off.
Adjusting off delay for Welcome Home and
Entry functions
The off delay of the Welcome Home and Entry
functions can be adapted individually.
Adjusting interior lights
Interior light functions on the vehicle can be
adapted individually in the “ Interior lights ” menu.
Activating or deactivating interior lights
when the door is opened (depending on
equipment)
You can configure the interior lights to be switched
on when the door is opened.
1.
Main menu “
Vehicle
”
> “ Settings ”
> “ Display ”
2.
“
Lower line
”
and confirm.
3. Select the desired display contents
and confirm.
1.
Main menu “
Vehicle
”
> “ Settings ”
> “ Display ”
2.
“
Brightness
”
and confirm.
3. Adjust to the desired display brightness
and confirm the setting.
1. Main menu “ Vehicle ”
> “ Settings ”
> “
Light & Visibility
”
and confirm.
1. Main menu “ Vehicle ”
> “ Settings ”
> “
Light & Visibility
”
> “ Exterior lights ”
and confirm.
1.
Main menu: Select “
Vehicle
”
> “ Settings ”
> “ Light & Visibility ”
> “ Exterior lights ”
2.
Select “
High beam assist
.”
3. Confirm your selection.
High Beam Assistant is activated.
High Beam Assistant is deactivated.
1.
Main menu “
Vehicle
”
> “ Settings ”
> “ Light & Visibility ”
> “ Exterior lights ”
2. “ Fade-out ”
and confirm.
3.
Set desired off delay
and confirm the setting.
1. Main menu: Select “ Vehicle ”
> “ Settings ”
> “ Light & Visibility ”
> “
Interior lights
”
and confirm.
1. Main menu “ Vehicle ”
> “
Settings
”
> “ Light & Visibility ”
> “ Interior lights ”
2.
Select “
by opening door
”
in the display.
14_991_Turbo_21.book Seite 120 Mittwoch, 9. April 2014 2:19 14