Porsche 1D6, Technical Information

Page: 6 / 12

Tequipment
6
6690
ENU
27/07
Technical Information
Figure 7
2 Fit the trailer hitch and foam parts ⇒ Workshop
Manual ’669019 Removing and installing trailer hitch
- section on "Installing"’
.
2.1 Check that the screw threads and contact
surfaces (
⇒ Figure 7 -A- ) for fitting the trailer
hitch are not dirty. Clean them and re-cut the
threads using an M12 x 1.5 tap, or using an
M14 x 1.5 tap on older vehicles, if necessary.
2.2 Fit the trailer hitch and tighten hand-tight at
the left and right using eight new screws (M12
x 1.5 x 100, or M14 x 1.5 x 100 on older
vehicles)
⇒
Figure 7
-B-
.
Figure 8
2.3 Align screw guides for the trailer hitch
⇒
Figure 8 -A- symmetrically with respect to
the eight screw heads ⇒ Figure 8 .
2.4 Tighten trailer hitch fully.
Tightening torque 100 Nm (74 ftlb.) +90°
Figure 9
2.5 Fit foam part on trailer hitch
A – Foam part for mechanical trailer
hitch
B – Foam part — Not For USA
2.5.1 ONLY for vehicles with spare wheel
carrier:
Select foam part for the relevant
model year and cut it according to
the marking
⇒
Figure 9 .
Aug 15, 2007
Page 6 of 12
Tequipment
2007© Porsche Cars North America, Inc.