Porsche 1D6, Technical Information

Page: 10 / 12

Tequipment
6
6690
ENU
27/07
Technical Information
Figure 17
3.5 Install trailer hitch control unit ⇒ Workshop
Manual ’669619 Removing and installing
trailer hitch control unit - section on
"Installing"’
.
3.5.1 Fit M5 sheetmetal press nut
⇒
Figure 17
-A-
to the control unit
support ⇒ Figure 17 -B- .
3.5.2 Fit trailer hitch control unit
⇒
Figure
17 -C- on the control unit support
and secure with the M5 x 12 screw
⇒ Figure 17 -D- .
Tightening torque 3.5 Nm
(2.5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.)
Figure 18
3.6 Plug in connector A (black
⇒
Figure
18 -A1- )/connector B (red ⇒ Figure
18
-A2-
)/connector C (blue
⇒
Figure
18 -A3- ) from top to bottom on the trailer
hitch control unit.
Position foam sleeve (prevents rattles and
chafing) back over connector B
⇒
Figure
18 -B- .
Figure 19
3.7 Plug in connector E (green, ⇒ Figure 19 -A- )
on connector strip for 4DR connection point
at the top.
3.8
ONLY
for vehicles with level adjustment
control unit:
Fit level adjustment control unit
⇒
Figure
19 -B- ) into bracket and press clamp into
control unit support.
Aug 15, 2007
Page 10 of 12
Tequipment
2007© Porsche Cars North America, Inc.