PORSCHE DESIGN PDB90, User Manual

Page: 9 / 20

8
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is
Placement
For best results, place your subwoofer as shown
below.
Wall mount
Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your Soundbar.
•
Before wall mount, you need not remove the rubber
feet at the bottom of the Soundbar, otherwise the
•
Depending on the type of wall mounting your Soundbar,
make sure that you use screws of a suitable length and
diameter.
•
Please check whether the USB port on the back of the
Soundbar is connected to a USB device. If it is found
you need to use another USB device of the appropriate
size.
Suggested wall mounting height
before wall mounting the soundbar. With a
TV preinstalled, wall mount the soundbar
50mm/2.0’’ in distance from the bottom of the
TV.
1
Drill 2 parallel holes (Ø 3-8mm each
according to wall type) on the wall. The
distance between the holes should be
660mm / 26.0”.
» You can using the positioning paper
(included).
2
wall if necessary. Tighten the wall mount
brackets on the wall with screws and
screwdriver (not included). Make sure that
they are securely installed.
» Attach the wall brackets (x2) to the
wall.
3
Install the wall mounting screws into the
back of the unit.
4
and slot into place.
1
~50mm/2.0"
3
3.5-4mm/0.14?0.16?
4mm/
0.16?
>25mm/0.98?
660mm/26.0"
3.5-4mm/0.14"0.16"
4mm/
0.16"
>25mm/0.98"
2