PORSCHE DESIGN PDB90, User Manual

Page: 15 / 20

14
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
device through your Soundbar speakers.
What you need
• A Bluetooth device which supports
Bluetooth version as 5.0 + EDR.
• Compatibility with all Bluetooth devices is
not guaranteed.
• The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press the button repeatedly on the
unit or on the remote control to switch the
Soundbar to Bluetooth mode.
» NO BT is displayed on the display
panel.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Porsche Design PDB70 to start
connection (see the user manual of
the Bluetooth device on how to enable
Bluetooth).
3
Wait until you hear the voice prompt from
the Soundbar.
» If the successfully connected, BT is
displayed on the display panel.
4
Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
• If your Bluetooth device supports
you can press / to skip to a track,
or press to pause/resume play.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
If you want to connect your Soundbar with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
OPTICAL / HDMI Operation
Ensure that the unit is connected to the TV or
audio device.
1
Press the button repeatedly on the
unit or on the remote control to select
the OPTICAL , HDMI ARC, HDMI
mode.
2
Operate your audio device directly for
playback features.
3
Press the VOL +/– buttons to adjust the
volume to your desired level.
Tip
•
While in OPTICAL/HDMI ARC mode, if there’s no sound
you may need to activate PCM or Dolby Digital Signal
output on your source device (e.g. TV, DVD or Blu-ray
player).
•
The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio
setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital (Refer to the
user manual of the input source device for its audio
setting details) with HDMI / HDMI ARC /optical input.
•
In HDMI mode, when the DOLBY ATMOS audio format
is entered, the Soundbar display shows DOLBY ATMOS.
•
When inputting Dolby DIGITAL audio format, When
Dolby Surround is turned on, the Soundbar display
shows DOLBY SURROUND. Dolby Surround is turned
•
When the DOLBY DIGITAL audio format is entered, the
Soundbar display shows DOLBY AUDIO.
•
When the PCM audio format is entered, the Soundbar
display shows PCM AUDIO.
•
When entering non-PCM or DOLBY DIGITAL audio
formats, if there’s no sound output from the unit and
the display show ERROR.