background image

7

BRASSWARE AND ACCESSORIES
First of all we thank you for buying our products which are manufactured to the highest standards. 
However in common with other products our brassware requires the correct cleaning and periodic 
maintenance.

CLEANING
To clean brassware and accessories please note the following recommendations.
- For regular cleaning only use warm soapy water, if this is not possible use soft non abrasive gels or 

similar cleaning products, rinse thoroughly and polish with a soft cloth.

- Please avoid the use of harsh or abrasive products such as scouring powders, those products with 

phosphoric acid, hydrochloric acid, formic acid or acetic acid that could badly damage the product. 
Please only use PH neutral products.

- Dry the items after each cleaning sesion and after every use to avoid limestone appearance.

WARNING
- Cleaning materials will only worsen already damage product.
- Do  not  mix  cleaning  products,  the  chemical  reactions  can  emit  toxic  fumes  and  react  badly  with 

product surfaces.

- Do not use harsh or abrasive cloths, pads or cleaning products.
- Do not use bleach or other chlorine based cleaning products.
- Only use suitable cleaning products as recommended for each product he cleaning products only 

make worse the surfaces if those are already damages.

RECOMENDATIONS  FOR  THE  CLEANING  AND  PRESERVATION O F  BRASSWARE  AND 
ACCESSORIES
- Read the manufacturers instructions.
- To protect the brassware, internal mechanism and to extend the life of the product it is recommended 

in line with “best practice“ to install isolation valves and in line   lters.

- Regular cleaning to reduce lime scale and soap residue build up.
- Do  not  leave  these  products i n  contact  with  the  product  surface  longer  than  the  manufacturer’s 

recommendations and rinse thoroughly with clean water.

- Do not spray cleaning products directly onto the product surface, spray onto a soft cloth and then 

apply to the product. Spraying directly onto the product can lead to cleaning   uids being drawn into 
the products through capillary action causing irreversible damage.

- If a   tap i s  left  dripping i t  may  lead  to  staining  and  lime  scale  build  up.  Please  ensure  taps  are 

correctly turned off after use.

GUARANTEE CLAUSE
- Failure to comply with the maintenance instructions may invalidate the guarantee.

Summary of Contents for noken ROUND INOX 100281129 N200000101









Reviews: