BATTERY PACK AND CHARGING
UNPACK AND SET-UP
CAUTION:
The charger for this product should be protected by a leakage
crrent device(rated at 30mA or less).
The purchased battery will be shipped in a low charge condition, and requires charging prior to use.
Allow several cycles of charging and
discharging (through use of the tool) for the battery to reach its optimum performance/runtime.
1. Connect the AC/DC adaptor
outlet end into the charging
base.
2. Plug the AC/DC adaptor into
a main power outlet. The
charger LED will illuminate
Green showing power is being
supplied to the charger
correctly.
3. Insert the battery pack into
the charger, ensure a firm
connection.
4. The RED LED on the
charging base is light ON,
signifying that the battery is
charging.
5. When RED Led light is off
and Green Led light on the
charging base is ON, means
that the battery is fully charged.
6. To remove the battery pack
from the charging base, hold
the charging base firmly and
pull the battery pack out.
When the battery pack is
attached to the tool, press the
switch trigger, there are 3 LED
lights to indicate the state of
battery capacity.
RED – Low battery
RED and Yellow – Middle-state of battery capacity
RED, Yellow and Green – Battery capacity is full.
Charging your lithium-ion battery
Battery gauge indicator
