2
Solar Powered Outdoor Siren – Manual
Quick Start .............................................................................................................................. 2
Product Description ................................................................................................................ 2
Installation Guidelines ............................................................................................................ 3
Behavior within the Z-Wave Network...................................................................................... 3
Operating the Device .............................................................................................................. 4
Node Information Frame ......................................................................................................... 4
Associations ........................................................................................................................... 4
Configuration Parameters ....................................................................................................... 4
Command Classes ................................................................................................................. 6
Technical Data ....................................................................................................................... 6
Explanation of Z-Wave specific Terms ................................................................................... 7
Disposal Guidelines ................................................................................................................ 7
Support ................................................................................................................................... 7
Quick Start
This device is a Z-Wave actuator. The device usually comes precharged. In case there is
not enough power please place the device into sun light for 10 minutes.
1.
Open the case and turn on the power switch (ill.2 (A)) by moving it towards the
inclusion button (B). All LEDs will shine for a short moment to confirm.
2.
Remove the metal mounting plate from the device.
3.
Remove all protection foil from the device.
4.
Turn your controller into inclusion mode with a short single click on the internal
inclusion button (ill.2 (B)).
The device supports secure communication if the controller supports secure communication
as well. Keeping the inclusion button pushed for 2 seconds includes the device unsecured
regardless of the controller’s capabilities. Once the siren is placed on the metal mounting
plate the tamper protection is activated. Do not remove the siren anymore unless it is
deactivated!
Product Description
This solar powered outdoor siren can be used without any additional power supply or
batteries. It can be installed on any place on the outside of the house and can be controlled
using Z-Wave. The device will issue a very loud sound (105 dBm) and in parallel some
stroboscope light as well. The siren is self-protecting. Removing the main device from the
mounting unit immediately starts the siren and also reports the tamper attempt to the Z-
Wave central controller. All communication between the Z-Wave controller and the siren is
