Fig. 5A
Fig. 6A
Fig. 6B
Fig. 5B
31
28
30
30
26
30
30
31
26
31
12
12
1
1
6
6
6
1
1
11
11
30
Attach two Cross Tubes (#6) to one Board Tube (#1)
using a Bolt (#26), two Washers (#30)
and a Nut (#31) (Fig. 5A).
Then take one of those attached
Cross Tubes and attach its other end
to the other Board Tube and
a Cross Tube using a Bolt (#26),
two Washers (#30) and a Nut (#31).
Attach the Side Arms (#11) to the
Board Tubes (#2) using a Bolt (#26),
two Washers (#30) and a Nut (#31)
(Fig. 6A). Make sure the Arm is on
the outside of the Board Tube.
Attach the Forward Tubes (#12)
to the Top Tubes (#1) using
the spring locks (Fig. 6B).
Take the two dangling
Cross Tubes (#6) and
attach them to the horizontal
Connector Tube (#5) using
the Medium Bolt (#28), two
Washers (#30) and a Nut
(#31) (Fig. 5B).
Tip: Your game includes
just one Medium Bolt (#28).
STEP 5
STEP 6
