30
25
18
25
30
30
10
31
30
31
Tip: This is the last step where help is very helpful.
Tip: Don’t attach the bottom of the Backboard yet.
Attach the Backboard (#14) to the Top Tubes (#1)
using a Bolt (#25), two Washers (#30) and a Nut (#31)
for each of the top two holes.
Take the Ball Return Ramp
(#18) and pull each of the
sleeves over the Forward
Tubes (#12) (Fig. 13A). In
the back, pull the elastic
loop over the top Nut (#31)
on each side.
Pull the tab on each side of the Ball Return Ramp to the rear of the Backboard (#14).
Use a Bolt (#25) and one Washer (#30) on the front of the Backboard (#14). On the back, put the Ball Return
Ramp tab, a Washer (#30) and a Nut (#31) (Fig. 13B).
Fig. 13B
Fig. 13A
STEP 12
STEP 13
