poolstar France Sauna, Installation Handbook

Page: 38 / 76

38
IMPORTANT: Disconnect the cabin’s power supply cable before undertaking any work.
MAINTENANCE
Problems identified Possible reasons Solutions
No indicator light displayed on
the control panel.
Power supply cable disconnected Check power supply cable connection
The general power supply is cut Check that the switchboard and wall plug are working
Fault in power supply unit Contact your dealer
One or more infrared panels do
not heat up
The infrared panel’s cable is disconnected Check cable connections
One of the infrared panels is defective
Replace the infrared panel with an original component
supplied by the manufacturer
Possible reversal of the connections of the power supply
box
Intervert the LoadA and LoadB cables
Sauna gives off a smell Temperature of the panels or their cables is too high Switch off power supply and contact your dealer
Sauna light fittings no longer
work
Bulb not fully engaged Check bulb holder and replace if necessary
Bulb is defective Replace bulb
Electrical panel is defective. Contact your dealer
A speaker is not working
Speaker cable disconnected Reconnect the cable
Speaker defective Contact your dealer
MP3 player not working
Power supply cable disconnected Reconnect power supply cable
MP3 player not switched on
Check the 12V DC power supply cable and replace if
required
The USB key is not recognized Check the format of audio or format the USB key files.
A beep sounded Temperature sensor is incorrectly connected or defective Reconnect the cable or replace the sensor
One or more keys on the control
panel do not work
Control panel wire pinched or defective
Check the board connection mat and its passage in the
sauna
Defective board Contact your reseller
Does not rise or little tempe-
rature
Ambient temperature too low
Make sure the room that houses the sauna is at least
15 ° C
Infrared panel contains or defective
Identify the panel (s) that do not heat up and contact
your dealer