14
Skimmer fi lter with replaceable cartridge maintenance.
After the bath and its fi ltration have been turned off (“O”), take off the acrylic cover above the skim-
mer fi lter, unscrew the plastic lid of the fi lter and take out the cylinderlike cartridge. The cartridge
should be cleaned with a soft brush and warm water. Then all the elements should be installed again
in the opposite order and the bath may be switched on again.
Filtration (first speed)/
Hydromassage (second speed)
Filtration and massage flow (first and second speed)
Additional flow
(only second speed) through a pressure valve
Telescopic skimmer filter
Return flow (first and second speed)
Massage jets
1.8. DISINFECTION
Disinfection process in the SPA Marina is ozone based. Ozone is used during filtration.
Additionally, the bath is equipped with a START SET for pH correction and disinfection with active
oxygen, as described in Part 1.10.
1.9. THERMAL COVER (ADDITIONAL OPTIONAL)
The SPA MARINA can be optionally provided with a thermal cover.
When is it necessary to have a thermal cover?
– when the bath is going to be used outdoors, i.e. in a garden (the cover prevents the water from
excessive cooling down and keeps the bath clean),
– when the bath is going to be used very frequently indoors (the cover serves to prevent the water
from excessive evaporation)..
To keep the cover on place (no matter of the weather
conditions) there are 4 tie down strips with buckle-lock.
Metalic ends of the strips should be assembled to the down
side of the cabinet.
The thermal cover has 2 symetrical parts with the kind of
Summary of Contents for SPA Marina
Page 1: ...SPA Bath Marina 188 x 133 Installation and user manual ...
Page 22: ...22 ...