4
3.
ELECTRONICS UNIT
3.1.
First commissioning
When switching on the electronics unit for the first time, carry out the following programming.
Successive
menus
Possible settings
Navigation
Français
English
Deutsch
Español
Italiano
Nederlander
Portugués
For each parameter, select a data item with the
buttons, then confirm with the
OK
button.
From 10 to 200 m
3
, in increments of 10.
Day / Month / Year
Hour / Minute
In line
Dashboard
3.2.
Keypad
COMMAND KEY
(depending on
model)
FUNCTION
MENU
Switching on the electronics unit.
A few minutes after switching on, production starts automatically (with or without ORP
check).
Switching off the electronics unit
(press and hold)
.
When switching off, the screen and the green LED turn off while the red LED comes on.
If an alarm has been activated, press first on to switch off.
Access the menus.
BOOST
Boost mode starts for 24 hours.
T°C
Water temperature display for a few seconds
(only if the default display is set to « In line
display »)
.
Direct access to the «
»
menu
(press and hold)
.
SALT
Salt level display for a few seconds
(only if the default display is set to « In line display »)
.
Direct access to the «
»
menu
(press and hold)
.
pH
This command key is only present on the
DUO
and
PRO
models.
Direct access to the «
» menu
(press and hold)
.
Selecting a value or data element.
Cancellation of an entry
Back to previous menu.
Stopping Boost mode.
OK
Command confirmation.
Entering a menu.
Dismissing an alarm.
