background image

12. WARRANTY

THIS EQUIPMENT HAS BEEN MANUFACTURED AND TESTED TO THE HIGHEST STANDARD 

AND ACCORDINGLY CARRIES THE FOLLOWING WARRANTY. 

12.1 

12.2 

12.3 

12.4 

12.5 

12.6 

12.7 

12.8 

The Pool Pro Power Pack will be repaired at no charge for a period of 24 Months from the date of 

purchase should it be found, after examination, that the failure has been caused by faulty workmanship or 

materials. This is a back to base warranty. The Electrolytic Cell carries a 1 year repair / repl 4 

years pro-rata warranty (based on a percentage of the recommended retail price nominated by the 

manufacturer). 

*The warranty applicable to commercial application is limited to 12 months from the date of 

installation unless a commercial model is purchased then this is 24 months. 

Adverse operating conditions beyond the control of the manufacturer such as improper voltage or 

water pressure, excessive ambient temperature or any condition that adversely affects the 

performance of the equipment will render this warranty null and void. 

Defective equipment must be returned to the manufacturer or dealer as soon as the purchaser 

becomes aware of the defect and all transport must be prepaid. Neither the manufacturer nor the 

dealer shall be responsible for any goods damaged in transit. 

If after examination the equipment is found to be defective it will be repaired or replaced free of 

charge (other than transport costs which will be borne by the purchaser). However, if upon 

inspection of the equipment it is found that the terms of this warranty are not satisfied, then the 

usual charges of the manufacturer for repair or replacement will be made. 

Any liability of the manufacturer pursuant to the Trade Practices Act 1974, as amended for a breach 

of a condition or warranty shall be limited to replacing or acquiring the equipment (or part thereof) 

where the same has been supplied. 

The maximum liability incurred by the manufacturer shall not in any case exceed the contract price 

for the equipment or the product parts or components thereof claimed to be defective. Further, the 

manufacturer shall not be liable for any loss, damage or delay directly or indirectly caused by any 

malfunction of or defect of or failure of the equipment other than as expressly provided in this 

warranty. 

Products sold by the manufacturer are designed for use with swimming pool water balanced in 

accordance with the Langelier Saturation Index with a pH range of 6.8-7.8. Chlorine level should not 

exceed 4ppm and the salt level should not exceed 4000ppm. 

The manufacturer will not be held liable for damage caused by, but not limited to, corrosion, scaling 

or stress. 

The Warranty is void under the following circumstances: 

• Installation is carried out incorrectly by any person other than a person authorised by us to do so. 

• The Power Pack or Cell is serviced by any person other than a person authorised by us to do so. 

• Correct salt levels are not maintained at all times. 

• The Power Pack is not protected from the elements. 

• The Power Pack is not operated in a position/area with good ventilation. 

• Water has been allowed to enter the Power Pack or Junction Box. 

• Run in a commercial installation (these have a 1 year warranty on Power Pack and Cell unless a commercial

 model is purchased then this is 24 months). 

• Insect infestation or penetration by dust, sand or other foreign particles inside the Power Pack. 

• Damage beyond our control. 

• Equipment that has been misused, neglected, damaged, repaired without authorisation or altered in any way. 

This warranty is applicable to workmanship and materials only. 

This warranty is not transferable under any circumstance. 

This unit is for use in domestic swimming pools only where the correct size unit produces enough chlorine in 

approx. 8 hours.  Extended periods to gain more chlorine production voids the Warranty. 

Keep your original purchase invoice and serial number in a safe place.

Summary of Contents for CPP Series

























Reviews: