background image

Using the
POOL FROG

®

 Pac

Cut handle from POOL FROG

®

 Pac using 2” PVC

cutting tool or a hacksaw

  

(KEEP OUT OF REACH

OF CHILDREN).

B.

  

If using a 2” PVC cutting

tool, place curved section
of tool around the narrow
end of one pac tower and
line up blade on indent.

A.

  Find the

indent in
the plastic.

C.

 

Squeeze the handles

together. Repeat for other
side.

D. 

 

If using a hacksaw to

cut the pac, line up
hacksaw blade on indent
and cut with a smooth
sawing action.

F.

  

If openings are pinched

together, open with fingers or
re-cut closer to the colored
screens inside POOL FROG

®

Pac. Leave at least 1/4" of
plastic to fit into POOL
FROG

®   

Chlorine Cycler base.

Finished cut ends

E.

  

Whether using a 2” PVC

cutting tool or a hacksaw,
make sure the blade comes
straight across on the indent
line for a clean cut.

POOL FROG
Pac
towers

POOL FROG

Pac

towers

Key in POOL
FROG
Chlorine
Cycler

Opening in
POOL FROG
Pac

A correct
oval opening

Avoid a
pinched
opening.

Indent in plastic

Cutting tool
available at local
hardware store.

17.

18.

19.

20.

16.

15.

9

POOL FROG Pac

POOL FROG

®

Mineral Cycler

POOL FROG

®

Chlorine

Cycler

Replace cap by hand only.

DO NOT OVERTIGHTEN.

DO NOT USE CAP TOOL
TO TIGHTEN  CAP.
FOR REMOVAL ONLY.

Turn POOL FROG

®

 Pac

over and shake slightly
until chlorine tablets fall
into tower areas.

Avoid sparks, open flame or smoking while handling the
POOL FROG

®  

Pac.

Insert POOL FROG

®

 Pac

into POOL FROG

®

   

Chlorine

Cycler, lining up the
openings in the POOL
FROG

®  

Pac with keys in

POOL FROG

®  

Chlorine

Cycler.

NOTE:

 Openings are a

different shape than keys.

The POOL FROG

®  

Pac is made of HDPE

plastic. When the POOL FROG

® 

Pac is empty,

triple rinse in pool water, drain, and recycle or
wrap in newspaper and discard in trash.

CAUTION Read Carefully

 – 

USE ONLY

 

the factory recommended replacement POOL

FROG

® 

Pac. (See label.)  DO NOT USE any other pac or bulk chemical tablets in the POOL

FROG

®

  

Cycler. Use of any other product could result in over chlorination, bleached liners,

unsafe pool conditions, fire or explosion. Warranty will be void if the correct pac is not used.

Avoid sparks, open flame or smoking
when handling the POOL FROG

® 

Pac.

POOL FROG

® 

Pac recommended to

assure up to 50% reduction in chlorine
use*. 

POOL FROG

® 

Pac sold

separately.

(EPA Reg. No. 53735-2)

*

Compared to the minimum EPA recommended chlorine

level of 1.0 ppm for a stabilized swimming pool.

Mark your calendar for the six month
replacement of the POOL FROG

®

Mineral Reservoir, 90-day replacement of
FROG BAM

®

 and approximate replacement times

for the POOL FROG

® 

Bac Pac. Once wetted, the time-

released mineral coating of the POOL FROG

®

 Mineral

Reservoir is effective up to 6 consecutive months or one
pool season whichever is shorter. After that time, even if you
hear the spent media inside, it is no longer effective and
must be replaced.

21.

Summary of Contents for Pool Frog XL PRO 5450

















Reviews: