Pontiac 2005 Grand Prix, Manual

Page: 76 / 82

[Show/Change to] Single Map Mode: This command
will cause the system to change the map display to
single map mode.
[Change to] 3D Map [Mode]: This command will
cause the system to change the map display to the
3-dimensional map.
[Change to] 2D Map [Mode]: This command will
cause the system to change the map display to the
2-dimensional map.
Destination Commands
Home, Go Home: These commands will cause the
system to enter the Home destination as a waypoint or
final destination, if one is set.
Go to Starting Point, Previous Starting Point: These
commands will cause the system to enter the last
available starting point as a waypoint or final destination.
[Go to] Previous Destination: This command will
cause the system to enter the last available destination
as a waypoint or final destination, if one is available.
[Go to] Preset Destination [Number] (number):
This command will cause the system to go to the preset
destination number. This preset destination can be
chosen as a waypoint or a destination. There must be
a location stored in the preset destination number that is
chosen. For example, first store a location in Preset
Destination 3. Say “Go to Preset Destination 3.”
The system will go to Preset Destination 3 and prompt
you to choose it as a waypoint or destination.
Add [to] Waypoint: This command will cause the
system to add the current marked point as a waypoint.
This command is used after the following commands
have been used: Home, Go to Starting Point,
Go to Previous Destination.
Enter Destination: This command will cause the
system to add the current marked point as the final
destination. This command is used after the following
commands have been used: Home, Go to Starting Point,
Go to Previous Destination.
4-6