Pontiac 2005 Grand Prix, Manual

Page: 72 / 82

Voice Recognition
The navigation system’s voice recognition allows for
hands-free operation of navigation and audio system
features. Voice recognition can be used when the
ignition is on or in ACC or when Retained Accessory
Power (RAP) is active.
This feature only works if the map DVD is inserted.
If you try to use voice recognition without the map
DVD inserted, the system will display “Please insert
the navigation map DVD to use the voice recognition
feature.”
To use navigation voice recognition, do the following:
1. Press this talk
symbol hard key
and release it when
you hear a beep.
The audio system,
if on, will mute.
2. Clearly state one of the commands listed on the
following pages. For example, say “FM1.”
3. The system will tell you the command being
implemented. For example, the system will
say “FM1 Radio” and change the audio system
to the FM1 source.
You may end voice recognition by not speaking any
commands. After about five seconds of silence,
the system will automatically cancel voice recognition.
At times, the system may not understand a spoken
command. If this happens, try again. If a spoken
command is not available, the system will provide
feedback based on availability.
While using voice recognition, make sure to keep
interior noise levels to a minimum. Otherwise, the
system might not recognize voice commands.
The system will only recognize commands spoken
in English.
4-2