- EN -
10
Remedy of faults
Malfunction Cause
Remedy
Pump does not start.
No connection to the solar module.
Check the connection to the solar module.
Connect the pump to the solar module.
Push the plug completely into the socket (up
to the stop).
The solar module is soiled.
Clean
The impeller unit is blocked.
Clean
The battery capacity is exhausted.
Charge the battery for at least 4 hours.
Insufficient sunlight
Align the solar module to the sun.
Insufficient or no pump delivery
The filter is clogged.
Remove the filter housing, remove and clean
the filter.
The nozzle unit is clogged.
Remove and clean the nozzle unit.
The impeller unit is worn.
Replace
Insufficient sunlight
Align the solar module to the sun.
The battery capacity is exhausted.
Charge the battery for at least 4 hours.
LEDs are not lit.
No connection to the solar module.
Connect the LED lighting to the solar mo-
dule.
Push the plug completely into the socket (up
to the stop).
The LED lighting is switched off.
Switch on the LED lighting.
The surrounding area is too light.
—
The battery capacity is exhausted.
Charge the battery for at least 4 hours.
The LED lighting is soiled.
Clean
The LED lighting is defective.
Dispose of the LED lighting.
The unit cannot be switched on.
The remote control battery capacity is exhausted.
Replace
The remote control is too far away from the unit.
Observe the range of the remote control.
No connection to the solar module.
Check the connection to the solar module.
Connect the pump to the solar module.
Push the plug completely into the socket (up
to the stop).
The rechargeable battery is defective.
Dispose of the unit.
Maintenance and cleaning
The unit has to be taken out of the water for cleaning or maintenance.
Cleaning the unit
Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface or impair the
function.
Recommended cleaning agent for removing stubborn limescale deposits:
– Vinegar- and chlorine-free household cleaning agent.
How to proceed:
Disassemble the unit.
Clean the filter housing and impeller unit. (
→
Replacing the impeller unit)
Pull the nozzle unit apart.
Clean all parts.
– Use a soft brush as an aid.
– Rinse parts in clean water.
Clean the solar module with a damp cloth and wipe dry.
Reassemble the unit in the reverse order.
Downloaded from www.watergardeningdirect.com
Summary of Contents for PondoSolar Island 250 Control
Page 2: ... 2 A PSO0034 B PSO0035 C PSO0039 Downloaded from www watergardeningdirect com ...
Page 3: ... 3 D PSO0036 E F PSO0037 PSO0038 Downloaded from www watergardeningdirect com ...
Page 90: ...90 PSO0057 Downloaded from www watergardeningdirect com ...
Page 91: ...Downloaded from www watergardeningdirect com ...
