Pontec 57741, Operating Instructions Manual

Page: 5 / 11

- EN -
9
Scope of delivery
Delivery

A Quantity Description
1 6 LED spot including bulb
2 1 Transformer
Installation and connection

B, C
Ensure that units are positioned and secured such that they cannot present a hazard:
• Install the transformer at a minimum safety distance of 2 m from the water.
• Position the lights outside of the water or in the water and tilt the light head as desired.
How to proceed:
1. Connect the plug of the spotlight connection cable to the socket on the transformer and hand-tighten the union nut.
Commissioning/start-up
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
• Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power supply) before carrying out any work on it.
N O T E
Sensitive electrical components. Incorrect connection will destroy the unit.
• Do not connect the unit to a dimmable power supply.
Switching on: Insert the power plug of the transformer into the socket.
• Check the function of the spotlights.
Switching off: Disconnect the transformer power plug.
Remedy of faults
S
Malfunction Cause Remedy
Lamp does not light up. Power supply interrupted Check power supply
Transformer defective Replace transformer
Luminosity decreasing Lamp glass soiled Clean
Downloaded from www.watergardeningdirect.com