S e r v i c e t r a i n i n g
000
04052000
1.2
Safety regulations
10. When testing the functioning
of the saw:
- The harvester head must
be in a horizontal position
- Nobody is to be in line with
the saw
- Keep the harvester head
as near to the ground as
possible
11. Never raise the harvester
head near the cab windows
while testing the saw.
12. When servicing indoors, the
saw must only be tested with
the chain removed.
13. Remove the pressure from
the hydraulic system before
beginning to service or repair
jobs.
14. Do not clean or lubricate the
machine while the engine is
running.
15. Always wear protective gloves
when handling the saw chain.
16. Pay special attention to
cleaning and inspecting the
limit switches, saw bar, saw
chain and delimbing knives.
Do not slit yourself to the
cutting edge of the delimbing
knives.
Always wear protective gloves
when handling the delimbing
knives.
17. Be aware of the danger of
slipping when working on top
of the harvester head.
18. If oil gets on your skin, re-
member to clean it off. Take
care of cuts and scratches
immediately.
19. Use safety goggles in service
and repair jobs.
20. Do not change the pressure
settings without the approval
by the manufacturer.
21. Use only sound tools and
approved lifting equipment,
abandon / repair damaged
tools.
22.
Danger!
Be careful when removing hot
liquids or oils from the
machine. Hot liquid or oil can
cause serious burn injuries.
23. Disposal of liquids, oil or other
problem wastes:
- Do not pour into ground or
water
- Find out the proper ways to
dispose of them
- Note the local environmental
regulations
