Ponpe 595 Series, Manual, Page: 14 / 17

Tee installation
False
Measure
sensor
2) In diagram 2a, an instable air chamber in the conductivity cell will cause
measurement error and instable. 2b is the correct
2a
3) In diagram 3, flow couldn’t fill the pipe, which will cause measurement error
and instable.
2) In diagram 4a, flow couldn’t pass measurement hole, this will cause
measurement error and instable. Diagram 4b is correct.
<4a>
Measure
sensor
Tee installation
Correct
Tee installation
In diagram 2a, an instable air chamber in the conductivity cell will cause
measurement error and instable. 2b is the correct way.
2b
In diagram 3, flow couldn’t fill the pipe, which will cause measurement error
2) In diagram 4a, flow couldn’t pass measurement hole, this will cause
measurement error and instable. Diagram 4b is correct.
<4b>
Tee installation
In diagram 2a, an instable air chamber in the conductivity cell will cause
In diagram 3, flow couldn’t fill the pipe, which will cause measurement error
2) In diagram 4a, flow couldn’t pass measurement hole, this will cause
PONPE