Ponpe 595 Series, Manual, Page: 11 / 17

4.2 Key Instruction
Ke
y
Name
Exit
In
interface
Digit
Select
1.
2.
3.
U
p
1.
2.
Enter
1.
2.
4.3 Operation Interface
In measurement interface, press
automatically.
Order Name
1
Conductivity
Cell Constant
2
Decima
l
Setting
3
Meas. Unit
Setting
4
4mA
corresponding
5
20mA
corresponding
Function
parameter setting, press to exit and back to
interface
In parameter setting, selection of thousand,
hundred, ten, single digit.
Decimal setting
In meas. mode, switch display ppm/ppt and
In parameter setting, change the chosen
In meas. mode, switch temp/mA/conductivity.
In main interface, enter parameter setting.
Save the chosen parameter, enter next
Operation Interface Instruction
In measurement interface, press for 3 seconds, enter the next setting menu
Function
C= flashing, press <Digit choose> and <Up> to enter
conductivity constant value, press<enter>
to save and enter next parameter setting.
Decimal setting flashing, operate
to choose
decimal. Enter to save and go to next parameter
setting.
Unit Flashing, operate <Up> to select meas. unit
（
ppm
，
ppt,µS/cm
或
mS/cm
）
,enter to
to next parameter setting.
4mA flashing, calibrate 4mA correspond value. Save
to enter next parameter setting.
20mA flashing, calibrate 20mA correspond value.
Save to enter next parameter setting.
to main
selection of thousand,
In meas. mode, switch display ppm/ppt and TDS.
In parameter setting, change the chosen digit.
temp/mA/conductivity.
setting.
menu.
for 3 seconds, enter the next setting menu
press <Digit choose> and <Up> to enter
conductivity constant value, press<enter>
to save and enter next parameter setting.
choose the
parameter
Flashing, operate <Up> to select meas. unit
to save and go
4mA flashing, calibrate 4mA correspond value. Save
20mA flashing, calibrate 20mA correspond value.
PONPE