PA30Bi-H Power Amplifier User Manual
22
6.2 Rear Panel
10.
Power socket:
Please use the power cable supplied by PONOVO (The cable with
special port must be used).
11.
Earth ground:
It should be grounded with earth during testing.
12
＊
.
Current output:
It is connected with the current input of the test object.
13
＊
.
Voltage output:
It is connected with the voltage input of the test object.
14.
Contact signal output:
Please refer to the terminal definition below.
15.
Control signal Input:
Please refer to the terminal definition below.
16.
Voltage signal Input:
Please refer to the terminal definition below.
17.
Current Signal Input:
Please refer to the terminal definition below.
＊
:
There are both current/voltage output in the front and rear panels. Current/voltage
output on either panel can be configured.
