PONNDORF Gerätetechnik GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation Manual
Hose Pump type P_classicplus
Page 18 of 25
Version 002_GB / 04.2017
6.4 Installing the pump hose
The outer surface of the pump hose must be lubricated sufficiently with
Ponndorf Special Grease before assembling it.
Remove power from the pump by removing the main fuses before doing
any cleaning / maintenance / assembly operations.
6.4.1
Pump with assembled
connecting sockets
6.4.2
Unscrew the flanges on
suction and discharge side
of the pump.
6.4.3
Lubricate the pump hose
with Ponndorf Special
Grease.
6.4.4
Switch on the drive.
The rotating pump pulls in
the pump hose.
When the hose appears on
the other side of the casing
switch the drive off again
and interrupt the power
supply.
CAUTION
