background image

WAT E R G A R D E N I N G   T O   T H E   M A X

POND & FOUNTAIN 

PUMPS

SPARE PARTS

PART 

NO.

DESCRIPTION

PV250

PV350

PV

1

Front Filter Screen

31PV032

31PV052

31PV077

2

Sponge

3

Flow Control Knob

4

Volute Assembly

31PV031

31PV051

31PV076

5

O-Ring 

31PV030

31PV050

31PV075

6

Impeller Assembly

7

Pump Motor Body

8

Suction Feet x 4

31PV035

9

Complete Fittings Kit

31PV033

31PV053

10

11

TROUBLESHOOTING

Problem

Reason

Solution

WATER PUMP 

NOT WORKING

No power

Check that the plug is connected and power point 

turned on.

Sponges and filter media blocked with sludge.

Clean the sponges and filters.

Impeller is blocked with sludge or lime scale build 

up.

Clean the impeller as per the instructions.

Submerse the equipment underwater 

then plug in. Refill if necessary.

Blocked impeller chamber or 

ceramic shaft is broken.

Clean the impeller. Check for wear. 

Replace if necessary.

WATER PUMP 

IS NOISY

Blockage in pump.

Clear the blockage.

Impeller & shaft worn out.

Replace impeller & shaft.

Impeller broken.

Replace impeller.

Water 

 is too low.

Refill feature with water to appropriate height.

Unit inlet is blocked or the water pump outlet is 

blocked.

Clear all blockages.

The height to which you are pumping is too high for 

the given model of pump.

Select a bigger model. 

Summary of Contents for PV250









Reviews: