WAT E R G A R D E N I N G T O T H E M A X
A Q U AT E C E Q U I P M E N T. C O M
SUBMERSIBLE
WATER PUMPS
IMPORTANT NOTES
• It is important to ensure that this is carried out
regularly as the cooling path inside the motor will
become clogged. If the impellor assembly becomes
worn or damaged it should be replaced (available
from your dealer or special orders). Failure to do
so may cause serious damage to pump. Inspect for
signs for wear and tear. The impellor set is a wearing
consumable part.
• Once the cleaning and inspection process is completed,
reassemble in the reverses manner. Reinstall the
impellor into the motor body.
To place the Impellor O’Ring around the black disc
successfully, firmly hold the disc with one hand, and
using the other hand stretch the O’Ring over the disc,
positioning it carefully into the groove. Pay attention
not to allow the O’Ring to roll forward, in-between the
black disc and the motor body.
With the impellor in the correct position, carefully place
the impellor cover back on, and then rotate clockwise
back into position.
• On some models re-insert the internal sponge back
into the filter cage and reattach to the pump. On other
models re-attach the front filter screen.
• Now re-attach the sliding base back into position to
lock the impellor cover from turning.
PMAX EVOII 7200_9200_11200_13600 Pump Instructions.indd 7
7/11/17 7:53 am
