PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
5. Insert 2 temporary nail into top corner hole of the nut plate and
tank, then holding the nails in place with hand, push the nail
through the liner. Fig. 5
Fig. 5
6. Assembly the face plate into the nut plate to securely seal the
liner to the tank, carefullly install the screws snug, finally
remove the temporary nails and attach the last two screw.
Fig. 6
NOTE: Door hinges positioned on face plate must face out
and at the bottom.
Fig. 6
7. Use knife cut and remove liner section from opening, wipe off
the excess sealant around the opening. Fig. 7
Fig. 7
8. Install door by flexing hinge pins inward, then snapping into
door opening. Fig. 8
NOTE: Foam side faces up.
Fig. 8
Door hinges
Temporary nail
Nut plate
Foam
