PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750
EN
9
MAINTENANCE
Step 1.
Before cleaning,
always disconnect the
pump from the power
source and remove the
pump cover.
Step 2
. Remove the
impeller cover to expose
the impeller assembly.
Remove the impeller
assembly by gently pulling
on the impeller blades. The
impeller is held in place by
a magnet.
Step 3
. Use a soft cloth or brush and warm water to clean the impeller and the
inside of the impeller housing.
Step 4
. Reassemble all pump parts and place in water before reconnecting to
the power source.
Regular cleaning of the pump may be necessary depending upon the
environment which it is operated. Clean the pump when it is visibly soiled or
when a drop in performance is detected. Clean pump in 4 easy steps!
TROUBLESHOOTING
IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in, the pump is getting power.
• Check the pump outlet and any tubing, fountains, spitters etc. for kinks or
obstructions.
1
2
3
4
