VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
4
EN
Part
Description
Qty
A
Spillway
1
B
Coupler
1
C
Gasket
1
D
Adapter
1
E
Bio-balls in Bag
2
F
Filter Pad
1
G
Clip
2
H
Cover
1
I
Face Plate
1
J
Screw
12
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present.
Compare parts with package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated Assembly Time: 45 minutes
• Tools required for assembly: Carpenter’s level, Marker or Chalk, Utility Knife, Caulking
gun, Liner sealant, Temporary nails, Philipshead screwdriver, and Hacksaw.
OPERATION INSTRUCTIONS
On the perimeter of the liner
At the beginning of a stream with liner
underneath
PACKAGE CONTENTS
Choose a location for your Waterfall
Spillway. I can sit inside the liner or along
the perimeter of the liner. Sometimes
a spillway is placed as the beginning
of a stream. The most important thing
to remember is that all water leaving
the spillway needs to have a pond liner
underneath it to avoid water loss as this
will drain your pond.
