16
8.2.3. Output parameters MPTS (Multiple Program Transport Streams)
Click on
Menu * Input & MPTS Settings
MPTS can be switched on or off separately for each channel strip -> Factory setting: Off
When MPTS is switched off, the factory default SPTS streams are active (see section 8.2.4.).
The network protocol can also be selected separately for each channel strip -> Factory setting: RTP
For further information on IP address and port, see section 7.1. (Input presetting).
Clicking on
Set
confirms the settings for each channel strip.
Note:
In MPTS mode, the EPG function (EIT insertion) is permanently switched on by default and can
’t be
deactivated. It must be ensured that sufficient bandwidth is available in the IP network to accommodate this.
UDP
or
RTP
Taking over the
settings for each
channel strip
MPTS
On
or
Off
