19
8.2.6. CI menu
A precondition of this operation is that the CAM module with corresponding smart card has been inserted into the
CI slot while the headend is disconnected from mains. After reconnecting to power the CAM is recognized and
initialized. The smart card must also be authorized to decrypt the desired programs. The status is displayed in the
menu
Diagnostic
. If the plugged CAM module is not recognized,
the message “No CAM available” appears if the
menu item is selected.
If the CAM module with the corresponding smart card is not recognized, no services can be decrypted! The
settings can be done in advance of the installation of CAMs and smart cards .
The selection of the services/programs to be decrypted takes place by placing a check mark in the column
CI
.
Click on
CI-Menu * CI 1, CI 2, CI 3
or
CI 4
Example display after click on
CI 1
The CAM modules should only be plugged in when the device is
switched off.
Menu lines with an arrow in front are selectable and/or contain submenus. The menu
structures always depend on the CAM manufacturer.