POLYtij S3i User Manual Download Page 4 | Manualshive

Page: 4 / 60

POLYtij S3i User Manual Download Page 4

4

Introduction

Thank you for purchasing our high resolution printer. We hope you get helpful information with this
machine, please read the manual to learn more about our machine by the following content:

Important precautions for use of the machine

Introduction of printer: Parts and components of the machine

Setup and Installation Instructions: Instructions for Equipment Setup and Cartridge Installation.

How to use the printer and the check work before/after use of the printer: explanations of general
operation and startup/shutdown.

Operation instructions: explanations on how to new/edit data for printing, and how to adjust

printer settings.

Care and Maintenance: Care and maintenance for printer and cartridge

Troubleshooting: Common failures and solutions

Appendix 1 - Terms and Definitions: Definitions for terms used in this document.

Please read this user manual carefully before using the printer to get full understanding and
knowledge of importance so that user will get full play of our machine, This will also help user to
have a quick reference to related sections when user have some problems during operation.

Note 1: If user cannot solve the problem encountered during operation, please contact us

Note 2: The information contained herein is subject to change without notice. The user manual will be
updated and revised timely if necessary by publish new version

Note 3: Any machine failure or damage caused by user’s negligence, it is no warranty.

«
...
2
3
4
5
6
...
»

Summary of Contents for S3i





























































Reviews:

No comments