POLYtij S3i, User Manual, Page: 38 / 60

38
2. According to the actual days for each month, the maximum value of
“
Day
”
will change
according to the actual days for each month.
Unit:
【
mm or inch
】
click the icon to select unit.
Language:
【
English and others
】
. Click the icon to select language.

Default language: English How to upgrade other language, please refer to 3.6.2.

After switching language, printer will restart automatically.
Device name: Allow 30 characters. When message contains device name source, the
message will change after the device name is changed.
Screensavers:
System default 3 min, 5 options for changeover: 1 min, 3 min, 5 min,
30 min, OFF. If screen saver is optioned OFF, screen enters standby status if inactive for the set
time.
Screen becomes active when there’s alarm or error.
Screen brightness:
User can set the brightness from 10-100%, default is 30%.
Message Mode:
Select message management mode, standard mode or simple mode.
3.5.2 Signal management
Note
：
User need to use three color alarm lamp to use this function.

User can choose alarm status with Buzzer , red alarm lamp , yellow alarm lamp
alarm status
Note
alarm status
Note
Stop printing The printer hasn’t
start printing. Ink warning The cartridge was
used over 95% and
less than 105%.
printer error Printer probation or
other errors Internet error Internet
unconnected
Ink run out Ink run out Database alarm End value after
finish print database
3.5.3 User management
It allows administrator to assign rights of operation.
Open user management feature