Polytec PSV-500, Hardware Manual

Page: 23 / 109

3-9
3 First Steps
9 ACQUISITION connector (SCSI-II-type)
PSV-500-M: Connection for the acquisition cable (ACQ HM) from the front-end
and from the PSV-E-530 junction box to transmit the measurement and trigger
signals
10 GENERATOR connections of the generator board (SMB jacks)
PSV-500-M: Connections for the BNC-SMB connecting cables to the PSV-E-530
junction box to transmit the signals of the function generator You will find a
description of the connections of the generator board in the following section.
11 CK connection
PSV-500-M: Connection for the SMB-SMB connecting cable to synchronize the
data acquisition board with the generator board
12 VIDEO network connection (marked in blue)
Connection for the blue network cable from the front-end / from the junction box to
transmit the video signal of the video camera in the scanning head
13 USB interfaces (Universal Serial Bus, type A)
Alternative connections for peripheral devices such as mouse, keyboard, etc. or
to connect the hardlock to release the software
14 MONITOR connection (DVI jack)
Connection for the monitor cable to the TFT monitor
15 NETWORK connections
For connecting up to an Ethernet network
16 Monitor connection (DVI jack)
Connection is not used !
17 COM 1 serial interface (9-pin Sub-D plug)
18 Monitor connection (DisplayPort jack)
Connection is not used !
19 KEYBOARD connection (6-pin circular jack)
Connection is not used !
20 MOUSE connection (6-pin circular jack)
Connection is not used !
21 Mains switch
22 Mains connection (socket for standard power cord)