110-509 PSC/EN
22
Setting the Low Limit Temperature
This sub-menu allows you to limit how low the temperature set point may be set. It also serves as a low
limit safety, alerting you if bath temperature falls below the low limit temperature setting. The Low Limit
value may be set from -35° to +10°C / -30° to +50°F; the factory default is -35°C / -30°F.
To avoid unwanted alarms or shutdowns during regular operation, the Low Limit value should be set at
least 5° lower than the selected control temperature.
To Access:
Press the
key until LOW LIMIT appears on the display.
To Change:
Press
or
.
To Accept:
Press
or allow the LCD to return to the main operational display
(approximately 10 seconds).
Appears when in the Low
Limit sub-menu
www.
GlobalTestSupply
.com
Find Quality Products Online at:
