1 Battery Access
& User Controls
1.1 Keyboard
1.2 Display & LED
2 First Time Installation
Open the two side covers and Insert the 2 AAA Alkaline supplied
batteries (or remove the small protection sticker if the batteries
are already installed in the compartment). The unit will display
the software version (202) and then default to the main screen.
1 Current day of the week 1 = Monday
2 Operating menu (active mode is framed)
3 Channel assignment number (displays installer/user menu
number when this option is chosen)
4 Installer/User menu active
5 Pictogram for programming
6 Time display
7 AM/PM (12 hour clock only)
8 Programme of current days setting
2.1 Initial Setup
When the batteries are first inserted the screen will first display the
software version before showing the set up screen.
2.2 Setting the Time and Date
The value to be adjusted will blink, and is adjusted with the keys
(-)
and
(+)
, once the adjustment made, validate it with the
(OK)
key.
The thermostat will jump automatically to the next value.
Note: at any time you can return to the previous value by pressing
on the escape key (
).
Progress of the adjustments:
Time and day:
Hours Setting
Minutes Setting
Day of Week setting (1 = Monday)
Date:
Day Setting
Month Setting
Year Setting
The message
“Save”
with the blinking green LED will
be displayed, press
(OK)
to finish and save.
You can access the time and date adjustment mode
by pressing the ( ) key for 1 second at any time.
Navigation key left
(
)
Navigation key right
(
)
Escape key
(
)
Program key
(
•
)
Minus
key
(-)
Plus
key
(+)
Validation
key
(OK)
Status
LED
Green flash: Attention
Red flash: Error (batteries, sensor...)
04
1
6
2
7
3
8
8
4
5
