background image

6

INFORMATION ON DISPOSAL FOR USERS 

OF WASTE ELECTRICAL & ELECTRONIC 

EQUIPMENT

This symbol on the product and/or accompanying documents means that used 

electrical and electronic products should not be mixed with general household waste.  

For proper treatment, recovery and recycling, please take this product to a designated 

collection point where it will be accepted free of charge.

Alternatively, in some countries you may be able to return your products to your local 

retailer upon purchase of an equivalent new product.

Disposing of this product correctly will help save valuable resources and prevent any 

potential negative effects on human health and the environment, which could otherwise 

arise from inappropriate waste handling.

Please contact your local authority for further details of your nearest designated 

collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with 

your national legislation.

SPECIFICATIONS

Technology

Compatible Material

Polishing Liquid

Polishing Time

Product Dimensions

Shipping Box Dimensions

Product Weight

Shipping Weight

Maximum Part Size

Operating Temperature

Storage Temperature

Power Requirements

Micro-Droplet Polishing

PolySmooth

TM

Isopropanol or ethanol, 70% or above [90% or higher recommended]

20 – 40 min typical [varies based on part size, alcohol concentration and ambient temp.]

230 x 300 x 360 mm [9.1 x 11.8 x 14.2 in]

350 x 400 x 460 mm [13.8 x 15.7 x 18.1 in]

4 kg [8.81 lbs]

6.8 kg [15 lbs]

Up to a 150 mm  (diameter) x 180 mm (height) cylinder [5.9 in (diameter) x 7.1 in (height)]

15 – 32 °C [59 – 90 °F]

0 – 38 °C [32 – 100 °F]

Power Supply: INPUT: AC 100-240V, 50/60Hz, 0.4A OUTPUT: 5V  2000 mA
ShenZhen Rongweixin Technology Co.Ltd

Polysher
INPUT: 5V       2000mA

Summary of Contents for Polysher

















Reviews: