SAN2-1000 Assembly - May 2020
Page 2 of 4
Step 1:
Insert the tabs of one panel into the slots of a second panel and slide down
into place. Repeat this step for the remaining panels.
Assembly Instructions
Wood Block
Step 2:
For the final panel, You will need to twist the whole assembly to
get the last tabs into the slots. To do this, place your foot or a piece of a 2
x 4 wood block under the panel with the tabs and push down on the panel
with the slots. Place the bottom tab partially into the bottom slot but do
not fully install it. This will hold the two panels into alignment and enable
you to insert the remaining tabs into their corresponding slots. Once you
have all the tabs inserted, you can ‘pop’ the tabs through the slots and the
unit will fully engage.
