GETTING STARTED
Downloading FlexScan3D Software
This quick start guide provides you with the resources to get you started on
3D scanning.
•
Factory Calibrated Scanner for capturing 3D data
•
FlexScan3D 3.5, SBSDK 3.0 for 3D scanning, mesh processing and
measurement tools.
Instructions for installing and activating FlexScan3D using an installation ID or
dongle can be found in the
User Manual
You can download the software from the
Polyga Accounts
Page
or by contacting your distributor.
To create a download account, please contact us at
Email:
Web:
www.polyga.com/contact/
GETTING STARTED
VISION V1 3D SENSOR
• Connect the 3d sensor to the computer via a USB
3.0 A to B cable. Plug in and fasten the 12V DC
power connector. Make sure the port used on the
computer side supports USB 3.0 data transmission
speed. It is suggested to use a powered USB hub
for
this
connection.
• Turn on the sensor using the back plate button.
The blue LED should light up once the button is
pressed.
SETTING UP THE VISION V1
