Polycom SpectraLink 8000 SVP010 Administration Manual Download Page 4

Page: 4 / 50

SpectraLink 8000 SVP Server: Administration Guide for SIP

PN: 1725-36033-001_E.doc

Customer Support

Polycom wants you to have a successful installation. If you have
questions, please contact our Customer Support Hotline at (800) 775-
5330.
The hotline is open Monday through Friday, 6 a.m. to 6 p.m.
Mountain time.
For Technical Support:

[email protected]

For Knowledge Base:

http://www.polycom.com/usa/en/support/voice/voice.html

For Return Material Authorization:

[email protected]

Icons and Conventions

This manual uses the following icons and conventions.

Caution! Follow these instructions carefully to avoid danger.

Note these instructions carefully.

Label

This typeface indicates a key, label, or button on Polycom
hardware.

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Summary of Contents for SpectraLink 8000 SVP010



















































Search results

Summary of Contents for SpectraLink 8000 SVP010

Reviews:

Related manuals for SpectraLink 8000 SVP010

Brands by name

Popular brands

Polycom SpectraLink 8000 SVP010, Administration Manual

Search results

Summary of Contents for SpectraLink 8000 SVP010

Reviews:

Related manuals for SpectraLink 8000 SVP010

Brands by name

Popular brands