Polycom SpectraLink 8000 SVP010, Administration Manual

Page: 31 / 50

Configuring the SpectraLink 8000 SVP Server
PN: 1725-36033-001_E.doc 31
Missed ding limit
The
Missed ding limit
defaults to 3 and should be left at this setting
unless advised by Customer Service to raise or lower it. The DING
message is a proprietary method of communication among system
elements. This setting is designed to assist service engineers in fine-
tuning system performance and should not be changed without their
consultation.
System Locked
This option is used to take the system down for maintenance. The
default entry is
N
(No). Set it at
Y
(Yes) to prevent any new calls from
starting. Return to
N
to restore normal operation.
Load balancing enables a locked SVP Server to distribute idle
handsets to other SVP Servers in the cluster. Existing calls will not
be interrupted and the SVP Server will become idle once all calls
are ended and idle phones are transferred to another SVP Server.
Maintenance Lock
The system automatically sets this option to
Y
(Yes) after certain
maintenance activities that require reset, such as changing the IP
address.
Maintenance Lock
prevents any new calls from starting. Note
that the administrator cannot change this option. It is automatically
set by the system. Reset the system at exit to clear
Maintenance Lock
.
Inactivity Timeout (min)
Set the number of minutes the administrative module can be left
unattended before the system closes it. This number can be from 1 to
100. If it is set to zero (0), the administrative module will not close due
to inactivity.
QoS Configuration
Select this option to set the DSCP tags. See QoS Configuration section
below.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299