Holding and Resuming Conferences
When you place a conference call on hold, you place all other
conference participants on hold.
To place a conference call on hold:
From the Active: Conference screen, press the
Hold
soft key. The
Hold: Conference screen displays. The other parties in the
conference call are put on hold.
From the Hold: Conference screen, you can do the following:
•
To resume the conference call, press the
Resume
soft key.
The Active: Conference screen will display again.
•
To place a call to a new party, press the
New Call
soft key.
The conference remains on hold, and the new call be-
comes the active call.
•
To end the conference call and split the conference into two
separate calls on hold, press the
Split
soft key.
Splitting Conferences
When a conference has been established, a
Split
soft key
is available. When you split a conference, you end the conference
and put all parties on hold.
To split a conference:
From the Active: Conference screen, press the
Split
soft key. The
conference ends, and all calls are split into individual calls and put
on hold.
Ending Conferences
You can end a conference, and your connection to the other
parties, by pressing the
End Call
soft key. When you use the
End Call soft key, the other parties remain connected.
To end a conference:
From the Active: Conference screen, press the
End Call
soft key.
T he two other parties remain connected.
33
